Model Number

EB-DTR

Feature:
Use DiBcom dib7070M/dib9080M high performance NIM chip with diversity structure
Speed over 230km/h min (at 8k, 64QAM, CR2/3.G I1/8, 474MHz)
High Doppler effect correction
Provide antenna power supply function
for pair use with mobile active antenna
Stores Over 1000 TV & radio programs
Channel list editing
Favorite channel list editing
Support USB Interface , mp3 and mp4
PIG (Picture in Graphic) support

3 Sets of video output for tourist bus and
vent to install with 3 monitors
On screen channel information
USB for SOFTWARE upgrade
OSD Teletext (DVB ETS 300 706) and
subtitle function support (EU model)
VBI Teletext support (EU model)
Fast scan for high speed driving and cross difference area
Wide DC power input from DC12-24V,
suitable for CAR
1 set of AV input for other DVD/GPS/GAME application.

Technical Specification
Tuner:
RF Input
UHF: 470 MHz ~ 862MHz
VHF: 174 MHz ~ 230MHz
Input Impedance:75Ω
Signal Level:-78.5dBm ~ -25dBm
Connector Type:F type terminal x 2
Channel Band Width:6M/7M/8M

Demodulation
Standard: DVB-T EN300 744
Constellation: QPSK,16QAM,64QAM
Guard Interval:1/32,1/16,1/8.1/4
FEC: 1/2,2/3,3/4,5/6,7/8
COFDM Carrier Mode:2K And 8k Non Hierarchical /Hierarchical

Video Decoder
Standard
MPEG-2 MP /ML
Transport Stream
ISO/IEC 13818-1 MPEG-2
Video Aspect Ratio: 4.3 /16.9
Video System:PAL / NTSC
Video Output:1 ± 0.3Vpp
Video Resolution:750*576 at 25fps or 720*480 at 30fps

Audio Decoder
Standard: ISO/IEC 11172-3
Audio Decoder: MPEG-1/2 Layer I And II
Audio Channel: R/L/ST
Audio Output: 1Vpp 47Kohm Adjustable With E Volume

Connector:
Power Cable And Jack
6Pins:
1.DC+12~24V Input
2.ACC
3.Parking Switch
4.DC+12~24V Output
5~6.GND

IR Extension Jack: For IR Extension Box
A/V Output Jack Video:3 RCA Jacks(4 Ways)
Audio:2 RCA Jacks(R/L)

Upgrade Port
USB Type
A/V Input Jack
Video:1 RCA Jacks(2 Ways)
Audio:2 RCA Jacks (2 Ways R/L)
ANT1, ANT2 Input Jack
IEC169-24, Female F Type

General:MPEG Ⅱ Chip
SUNPLUS 1002 With 32bit RISC ARC CPU 108MHz
Flash Memory:8 Mega bit
SDRAM:64 Mega bit
Power Supply:DC +12V ~ 24V ±10%
Power Consumption
Running : 3.8W Max , Standby :2.5W Max